Detailed Product Description

 solar water heater: 

We provide Solar Water Heater, Water Heater, solar collector,Hot Water Heater, solar hot water,Solar Water Heaters, solar energy heater,Solar Energy Water Heater, Solar Heat Collector, Hot Collector, Solar Water, pressuried solar heater,Solar Products.

The system of solar water heater relies on a natural Principle--"Thermosiphon". The key important point of  these systems is that:   the storage tank  is always located higher than the collector.

 As the sun's rays hit the all-glass evacuated solar collector tubes ,  the temperature of the water in the tubes rises making it less dense or lighter. and hot and lighter water naturally moves up to the top of collector and through the evacuated collector tube convert to the storage tank. This makes the colder and heavier water in  water  tank  moves down to the bottom of the collector.   that  continuous displacement occurs naturally. So the users can get the  hot water from the tank.

the system of solar water heater is an "Open Circuit" non-pressure system. By the air vent valve on the top of the storage cylinder and the over flow pipe in the bottom it maintains open to the air.

Materials:

Inner tank: Imported 304 2B food grade stainless steel.   thickness is 0.5mm

Outer tank: imported nacre white armor plate  or stainless steel

Insulating layer :50mm-60mm high pressure polyurethane foamed

Bracket:              premium cold roll bracket stainless steel screw

Vacuum tube: 3.3high borosilicate glass

 The vacuum tube of our solar water heater has the high absorption rate and low emission rate,

the absorption rate is 0.90-0.93 (AM1.5)

the emission rate is 0.05-0.075 (80±5)

vacuum tightness is P≤5.0*0.0001Pa

idle sunning property parameters is Y=220-260./KW

the average heat loss coefficient is Ult=0.6-0.7W(.)

It means the temperature in the water tank is range from  50 to 95.

Characteristic

1.       Best angle of stand makes the heat efficiency is very high .

2.       All of the inner tank is produced by  high-frequency ring welding or argon arc welding, which is very durable; high density

3.        The insulating layer made of high pressure polyurethane foamed

4.       The water inlet or  out let can be set up as your asked.

5.       Intelligent controller or electrical heat element can be choosed for this system.according to your requirement.

6.       Advanced technology ,which can dispose of  scale ,bacteria and prevent electricity

7.       environmental friendly